Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION MANUAL TRANSMISSION AND DIFFERENTIAL MSA5TCD98L20992

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD98L20992 documenatation <<

Text preview - extract from the document

3-1   [W4A1]                                SERVICE PROCEDURE
4. Main Shaft Assembly


4. Main Shaft Assembly                                       4) Using ST1 and ST2, remove the rest of parts.
                                                             NOTE:
A: DISASSEMBLY                                               Replace sleeve and hub with new ones. Do not
1. 2200 cc MODEL                                             attempt to disassemble because they must engage
                                                             at a specified point. If they should be
1) Put vinyl tape around main shaft splines to pro-
                                                             disassembled, marking engagement point on
tect oil seal from damage. Then pull out oil seal
                                                             splines beforehand.
and needle bearing by hand.
2) Remove lock nut from transmission main shaft              ST1   899864100 REMOVER
assembly.                                                    ST2   899714110 REMOVER
NOTE:
Remove caulking before taking off lock nut.
ST1      498937000     TRANSMISSION HOLDER
ST2      499987003     SOCKET WRENCH (35)




                                             B3M0087A

3) Remove insert stopper plate, sleeve and hub
assembly No. 2, baulk ring, 5th drive gear, and
needle bearing.

                                                                                                    B3M0834A



                                                             2. 2500 cc MODEL
                                                             1) Put vinyl tape around main shaft splines to pro-
                                                             tect oil seal from damage. Then pull out oil seal
                                                             and needle bearing by hand.
                                                             2) Remove lock nut from transmission main shaft
                                                             assembly.
                                            B3M0540C
                                                             NOTE:
   (A)    Insert stopper plate                               Remove caulking before taking off lock nut.
   (B)    Sleeve and hub assembly No. 2                      ST1   498937000     TRANSMISSION HOLDER
   (C)    Baulk ring                                         ST2   499987003     SOCKET WRENCH (35)
   (D)    5th drive gear
   (E)    Needle bearing (32 

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo