Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION TRANSMISSION CONTROL SYSTEM MSA5TCD98L21038

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD98L21038


>> Download MSA5TCD98L21038 documenatation <<

Text preview - extract from the document
                                  SERVICE PROCEDURE                                      [W1B0] 3-3
                                                                                 1. Manual Transmission


1. Manual Transmission                             6) Remove gearshift lever.

A: REMOVAL
1) Remove console box. 
2) Remove boot plate from the body.




                                                                                            G3M0683

                                                   7) Remove the exhaust cover and remove cush-
                                                   ion rubber from the body.

                                    B3M0615

3) Remove the spring between the joint and
bracket.




                                                                                            G3M0684



                                                   B: DISASSEMBLY
                                    G3M0680
                                                   1) Disconnect locking wire.

4) Remove stay from bracket.




                                                                                            B3M0617A


                                    G3M0681        2) Remove rod from gearshift lever.
5) Remove rod from joint.




                                                                                            B3M0618A

                                   B3M0616A



                                               5
3-3  [W1C0]                       SERVICE PROCEDURE
1. Manual Transmission


3) Remove snap ring, then disconnect gearshift        C: INSPECTION
lever from stay.
4) Remove boot from gearshift lever.                  Check each parts (Bush, cushion, spacer, boot,
                                                      spring, stay and rod etc.) for deformation, damage
                                                      and wear. Repair or replace any defective parts.
                                                      Determine defective parts by comparing with new
                                                      parts.




                                    B3M0619A

5) Remove O-ring, then disconnect bush (Stay
rear).




                                    B3M0620A
                                                                                             B3M0622A
6) Draw out spring pin, then remove bush (Shift
lever) from gearshift lever.
                                                      D: ASSEMBLY
                                                      1) Clean all parts before assembly.
                                                      2) Mount the following parts on the stay.




                                    B3M0621A




                                                                                             B3M0830A

                                                         (A)   Cushion rubber
                                                         (B)   Bush (Stay front)




                                                  6
                                        SERVICE PROCEDURE                                      [W1E0] 3-3
                                                                                       1. Manual Transmission


3) Mount each parts (Boot, O-ring, bush and                9) Connect rod to gearshift lever.
spacer) on the gearshift lever.                            Tightening torque:
CAUTION:                                                       12



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo