Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual BODY SECTION BODY AND EXTERIOR MSA5TCD99L380
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD99L380 documenatation <<Text preview - extract from the document SERVICE PROCEDURE [W13A0] 5-1
13. Door Mirror
12. Front Grille 13. Door Mirror
A: REMOVAL AND INSTALLATION A: REMOVAL AND INSTALLATION
1) Remove four upper clips from body panel. To 1) Remove the gusset cover.
facilitate removal, press portion shown in figure
using screwdriver.
B6M0146
B5M0294A 2) Remove inner remote control switch cover.
2) Pull front grille to detach it from two lower clips.
(Two lower clips remain on headlight.)
3) Installation is in the reverse order of removal.
NOTE:
Attach all clips to grille. Align them with clip hole in
body and push them into place.
B5M0296
3) Remove front door trim.
B5M0297
4) Remove front door trim.
55
5-1 [W14A0] SERVICE PROCEDURE
14. Side Protector
5) Disconnect the door mirror connector. 14. Side Protector
6) Remove the door mirror installation screws.
A: REMOVAL AND INSTALLATION
Side protector consists of three parts; front fender,
front door and rear door.
B5M0298A
7) Installation is in the reverse order of removal.
B5M0411A
1. SIDE PROTECTOR FRONT FENDER
PORTION
1) Remove bracket which secures mud guard to
front fender.
B5M0285A
2) Remove mud guard.
NOTE:
Detach the rear part of mud guard as required for
the procedure. It is not necessary to remove the
entire mud guard.
3) Use pliers to remove a clip from inside front
fender. Remove it from vehicle body but keep it
with side protector.
4) Installation is in the reverse order of removal.
56
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo