Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual BODY SECTION BODY AND EXTERIOR MSA5TCD99L381

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download MSA5TCD99L381 documenatation <<

Text preview - extract from the document

5-1 [W14A0] SERVICE PROCEDURE
14. Side Protector

5) Disconnect the door mirror connector. 14. Side Protector
6) Remove the door mirror installation screws.
A: REMOVAL AND INSTALLATION
Side protector consists of three parts; front fender,
front door and rear door.

B5M0298A

7) Installation is in the reverse order of removal.

B5M0411A

1. SIDE PROTECTOR FRONT FENDER
PORTION
1) Remove bracket which secures mud guard to
front fender.

B5M0285A

2) Remove mud guard.
NOTE:
Detach the rear part of mud guard as required for
the procedure. It is not necessary to remove the
entire mud guard.
3) Use pliers to remove a clip from inside front
fender. Remove it from vehicle body but keep it
with side protector.
4) Installation is in the reverse order of removal.

56
SERVICE PROCEDURE [W15A0] 5-1
15. Roof Rail

CAUTION: 15. Roof Rail
Insert clips firmly and carefully by hand. To
avoid damaging clips, do not forcefully push or A: REMOVAL AND INSTALLATION
hit clips.
1) Remove roof trim, rear quarter trim, pillar trim,
2. SIDE PROTECTOR FRONT DOOR AND etc.
REAR DOOR PORTIONS 2) Remove flange bolts.
3) Remove flange nuts.
1) Remove trim panel.
4) Remove roof rail.
2) Use pliers to remove clips from inside of doors.
Remove them from vehicle body but keep them
with side protector.
NOTE:
Front door portion has five clips, rear door portion
has four clips.
3) Installation is in the reverse order of removal.
CAUTION:
Insert clips firmly and carefully by hand. To
avoid damaging clips, do not forcefully push or
B5M0304
hit clips.
NOTE: 5) Installation is in the reverse order of removal.
To install side protector front door and rear door CAUTION:
portions, insert the first clip into the base hole [9 To prevent deformation, be sure to install roof
mm (0.35 in) dia.], and then insert other clips. rail in steps 4), 3), 2) and 1), in that order.

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo