Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual BODY SECTION DOORS AND WINDOWS MSA5TCD99L409

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5TCD99L409


>> Download MSA5TCD99L409 documenatation <<

Text preview - extract from the document
                                       SERVICE PROCEDURE                                         [W6A2] 5-2
                                                                                         6. Rear Window Glass


   (3) Stick them fast by pressing all sides lightly.        6. Rear Window Glass
10) Installation of molding:
   (1) Remove adhesive overflowing from outside              A: REMOVAL
   of glass until it becomes level with outer height
   of glass. Then, add adhesive to portions that             1. SEDAN
   need it, and clean with alcohol or white gaso-            1) Disconnect connector from rear defogger termi-
   line.                                                     nal.
                                                             2) Remove glass in the same manner as in wind-
                                                             shield.
                                                             NOTE:
                                                             A matching pin is cemented to the corners of glass
                                                             on compartment side. Use a piano wire when cut-
                                                             ting each pin.




                                          G5M0496

   (2) Install front side molding.
CAUTION:
Do not open and close door after moldings
have been installed. When opening and closing
door for unavoidable reason, lower door glass                                                       G5M0412
and gently move door.
11) Water leakage test:                                      2. WAGON
Test for water leakage about one hour after instal-
lation.                                                      NOTE:
                                                             It is impossible to remove the molding from the
CAUTION:                                                     glass.



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo