Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual BODY SECTION DOORS AND WINDOWS MSA5TCD99L410

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD99L410 documenatation <<

Text preview - extract from the document

                                  SERVICE PROCEDURE                                   [W7A2] 5-2
                                                                               7. Rear Quarter Glass


7. Rear Quarter Glass
A: REMOVAL
1. SEDAN




                                                                                            B5M0091A


1) Remove rear quarter molding.                      2) Remove glass in the same manner as in wind-
                                                     shield.
2. WAGON




                                                                                            B5M0092A
1) Remove rear quarter molding.
2) Remove glass in the same manner as in windshield.




                                                35
5-2   [W7B0]                            SERVICE PROCEDURE
7. Rear Quarter Glass


B: INSTALLATION
1) Finish surface of adhesive layer on body.                  5) Application of adhesive:
Using a putty knife, etc., cut layer of adhesive stick           (1) Cut nozzle tip as shown in figure.
firmly to body and finish it into a smooth surface of
about 2 mm (0.08 in) in thickness.
CAUTION:
Be careful not to damage body finish.




                                                                                                        G5M0414

                                                                 (2) Open cartridge and put it into a gun with
                                                                 nozzle attached.
                                                                 (3) Apply adhesive uniformly to all sides of
                                          G5M0497
                                                                 adhesion surface while operating gun along
2) Cleaning of body surface:                                     glass end face.
   (1) Remove chips, dirt and dust from body sur-             6) Installation of glass:
   face.                                                         (1) Hold glass with rubber suction cups.
   (2) Clean body wall surface and upper surface                 (2) Mount glass on body with matching pin
   of adhesive layer with a solvent such as alcohol              aligned.
   or white gasoline.                                            (3) Stick them fast by pressing all sides lightly.
3) Cleaning glass:                                            7) Water leakage test:
   (1) Remove dirt and dust from surface of glass             After installing glass, test for water leakage after
   to be adhered.                                             about one hour.
   (2) Clean surface of glass to be adhered with
   alcohol or white gasoline.                                 CAUTION:
4) Application of primer:                                     

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo