Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual BODY SECTION SEATS, SEAT BELTS, AND INTERIOR MSA5TCD99L419
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD99L419 documenatation <<
Text preview - extract from the document
SERVICE PROCEDURE [W2A1] 5-3
2. Rear Seat
10) After installation, ensure that all mechanisms 2. Rear Seat
operate properly and lock.
11) If any mechanism does not function properly, A: REMOVAL
loosen bolts (C), (D) and (E), slide seat as
required, insert all lock plate pawls into holes in 1. SEDAN
slide rail brackets, and tighten bolts (C), (D) and 1) Remove bolts securing hinges (located at front
(E) in that order. of cushion) to body.
12) Install bolt cover on rear end of slide rail. 2) Slightly raise front of cushion while pushing
13) Install headrest on backrest. down on cushion in the direction of "C". With cush-
NOTE: ion held in that position, move it forward until it is
Tighten bolts in the designated order. unhooked.
G5M0345
3) Remove bolts securing lower portion of back-
rest to body.
4) Pull strap (located in center of fold-down back-
rest) to release lock, and fold backrest onto cush-
ion. (Fold-down type)
G5M0346
5) Lift rear seat backrest in direction "A" until it is
released
9
5-3 [W2A2] SERVICE PROCEDURE
2. Rear Seat
2. WAGON 2) Transfer outer seat belt webbing to front of
backrest and fold backrest forward. Attach seat
1) Remove bolts securing hinges (located at front wire to upper hooks (2 places), and move pillow in
of seat) to body. the direction of "B" until backrest is aligned with
lower mounting holes in body.
G5M0350
G5M0348
2) Pull strap (located in middle rear portion of
cushion) to release lock. Lift cushion out and away 3) Engage backrest's folding mechanism with
from body. striker.
3) Pull knobs (located at each side of backrest's 4) Secure lower center and both sides of backrest
upper portion) up to release lock, and fold backrest to body with bolts.
all the way forward. 5) Slightly raise front section of cushion while
4) Remove the bolt (A) and then remove backrest. pushing down on cushion in the direction of "C".
(LH side) With cushion held in that position, attach rear sec-
5) Remove the bolt (B) and then remove backrest tion of cushion to hooks at lower frame location.
(RH side) from hinge bracket (C). CAUTION:
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo