Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual BODY SECTION SUPPLEMENTAL RESTRAINT SYSTEM MSA5TCD99L432

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD99L432 documenatation <<

Text preview - extract from the document

5-5   [W4A0]                        SERVICE PROCEDURE
4. Main Harness


4. Main Harness                                          7) Remove front side sill cover and then discon-
                                                         nect airbag connector (AB9) and (AB10). 
1) Turn ignition switch off.
2) Disconnect ground cable from battery and wait
for at least 20 seconds before starting work.
3) Remove lower cover. 
Disconnect airbag connector (AB3) and (AB8)
below steering column.
CAUTION:
Do not reconnect airbag connector at steering
column until main harness are securely re-in-
stalled.                                                                                       B5M0029A

                                                         8) Roll up floor mat and side sill lower cover of
                                                         both side and then remove main harness.




                                      G5M0312

4) Remove console box. 
5) Disconnect connector from airbag control mod-
ule.
6) Disconnect body harness connector (B31) from
connector (AB1).
NOTE:
The following procedures for removal are for "LHD
model". The procedures for "RHD model" are sym-
metrically opposite.




                                      B5M0103B




                                                    12
                                      SERVICE PROCEDURE        [W4A0] 5-5
                                                            4. Main Harness


9) Disconnect front sub sensor connector (A), side
airbag sensor connector (B) (side airbag equipped
model) and then remove protector (C).
10) Detach clips and then remove airbag main
harness.




                                                                   B5M0516A


11) Installation is in the reverse order of removal.




                                                       13

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo