Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ENGINE SECTION EMISSION CONTROL SYSTEM AND VACUUM FITTING MSA5TCD99L4

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD99L4 documenatation <<

Text preview - extract from the document

2-1   [W2A0]                       SERVICE PROCEDURE
2. Rear Catalytic Converter


7) Connect front oxygen sensor connector.          2. Rear Catalytic Converter
                                                   A: REMOVAL
                                                   1) Disconnect battery ground cable.




                                    B2M1979A




                                                                                          B2M1723

                                                   2) Lift-up the vehicle.
                                                   3) Disconnect rear oxygen sensor connector.
                                                   (Except 2500 cc California spec. vehicles)



                                    S2M0127A

8) Connect battery ground cable.




                                                                                          B2M0312

                                                   4) Separate center exhaust pipe and rear catalytic
                                                   converter assembly from rear exhaust pipe.


                                     B2M1723




                                                                                          B2M0055




                                               4
                                     SERVICE PROCEDURE                                         [W2B0] 2-1
                                                                                   2. Rear Catalytic Converter


5) Separate center exhaust pipe and rear catalytic       2) Install center exhaust pipe to front catalytic con-
converter assembly from front catalytic converter.       verter.
                                                         Tightening torque:
                                                             35

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo