Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ENGINE SECTION EMISSION CONTROL SYSTEM AND VACUUM FITTING MSA5TCD99L14

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD99L14


>> Download MSA5TCD99L14 documenatation <<

Text preview - extract from the document
                                      SERVICE PROCEDURE                                     [W12A0] 2-1
                                                                                 12. Main Fuel Level Sensor


4) Connect connector to vent control solenoid           12. Main Fuel Level Sensor
valve.
                                                        A: REMOVAL
                                                        1) Release fuel pressure. 
                                                        2) Open fuel flap lid, and remove fuel filler cap.




                                         B2M0964

5) Connect two hoses to air filter.

                                                                                                 B2M1746

                                                        3) Disconnect battery ground cable.




                                        B2M1888A

6) Install canister. 

                                                                                                 B2M1723

                                                        4) Disconnect fuel delivery hose (A), return hose
                                                        (B) and jet pump hose (C).




                                         B2M1780

7) Lower the vehicle.
8) Connect battery ground cable.

                                                                                                B2M0954E




                                         B2M1723




                                                   17
2-1  [W12B0]                         SERVICE PROCEDURE
12. Main Fuel Level Sensor


5) Remove nuts which install fuel pump assembly           B: INSTALLATION
onto fuel tank.
                                                          CAUTION:
                                                          Leave fuel filler cap open when tightening nuts,
                                                          to prevent fuel from flowing out through fuel
                                                          delivery and return pipes. Close fuel filler cap
                                                          after tightening nuts.
                                                          Installation is in the reverse order of removal. Do
                                                          the following:
                                                          (1) Install the fuel level sensor onto the mounting
                                                          bracket.

                                       B2M0955

6) Take off fuel pump assembly from fuel tank.




                                                                                                   S2M0855

                                                          (2) Always use new gaskets.
                                                          (3) Ensure sealing portion is free from fuel or for-
                                                          eign particles before installation.
                                       B2M0956
                                                          (4) Tighten nuts in alphabetical sequence shown
7) Disconnect connector from fuel pump bracket.           in figure to specified torque
                                                          Tightening torque:
                                                              4.4



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo