Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ENGINE SECTION EMISSION CONTROL SYSTEM AND VACUUM FITTING MSA5TCD99L3

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD99L3 documenatation <<

Text preview - extract from the document

2-1   [W1A0]                          SERVICE PROCEDURE
1. Front Catalytic Converter


1. Front Catalytic Converter                          4) Lift-up the vehicle.
                                                      5) Disconnect rear oxygen sensor connector.
A: REMOVAL                                            (Except 2500 cc California spec. vehicles)
1) Disconnect battery ground cable.




                                                                                            B2M0312

                                        B2M1723       6) Separate center exhaust pipe from front cata-
2) Disconnect front oxygen sensor connector.          lytic converter.




                                                                                            S2M0052
                                       B2M1979A

                                                      7) Remove bolts which hold front exhaust pipe
                                                      onto cylinder heads.
                                                      CAUTION:
                                                      Be careful not to pull down front exhaust pipe
                                                      and center exhaust pipe.




                                       S2M0127A

3) Disconnect rear oxygen sensor connector.
(2500 cc California spec. vehicles)

                                                                                            S2M0236




                                        S2M0128




                                                  2
                                       SERVICE PROCEDURE                                           [W1B0] 2-1
                                                                                      1. Front Catalytic Converter


8) Separate front catalytic converter from front            3) Install center exhaust pipe to front catalytic con-
exhaust pipe.                                               verter.
                                                            Tightening torque:
                                                                35

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo