Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ENGINE SECTION ENGINE (DOHC) MSA5TCD99L51

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5TCD99L51


>> Download MSA5TCD99L51 documenatation <<

Text preview - extract from the document
                                    SERVICE PROCEDURE                                         [W1A0] 2-3b
                                                                                               1. Precautions


1. Precautions                                           (2) All parts should be thoroughly cleaned, paying
                                                         special attention to the engine oil passages, pis-
A: GENERAL PRECAUTIONS                                   tons and bearings.
(1) Before disassembling engine, place it on ST3.        (3) Rotating parts and sliding parts such as piston,
ST1 498457000 ENGINE STAND ADAPTER                       bearing and gear should be coated with oil prior to
                  RH                                     assembly.
ST2 498457100 ENGINE STAND ADAPTER                       (4) Be careful not to let oil, grease or coolant con-
                  LH                                     tact the timing belt, clutch disc and flywheel.
ST3 499817000 ENGINE STAND                               (5) All removed parts, if to be reused, should be
                                                         reinstalled in the original positions and directions.
                                                         (6) Gaskets and lock washers must be replaced
                                                         with new ones. Liquid gasket should be used
                                                         where specified to prevent leakage.
                                                         (7) Bolts, nuts and washers should be replaced
                                                         with new ones as required.
                                                         (8) Even if necessary inspections have been
                                                         made in advance, proceed with assembly work
                                                         while making rechecks.

                                      G2M0709




                                                    13



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo