Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ENGINE SECTION ENGINE (SOHC) MSA5TCD99L40
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD99L40 documenatation <<Text preview - extract from the document2-3a [W5A1] SERVICE PROCEDURE
5. Cylinder Head
5. Cylinder Head 6) Disconnect spark plug cords.
7) Remove connector bracket attaching bolt.
A: REMOVAL 8) Remove camshaft position sensor and cam-
1. RELATED PARTS shaft position sensor support.
9) Disconnect oil pressure switch connector.
1) Release fuel pressure. 10) Disconnect blow-by hose.
2) Drain engine coolant. 11) Remove intake manifold.
4) Remove generator and bracket.
5) Remove A/C compressor and bracket. (With
A/C model)
2. CYLINDER HEAD
B2M2627A
(1) Rocker cover (3) Cylinder head
(2) Cylinder head bolt (4) Cylinder head gasket
1) Remove timing belt, camshaft sprocket and
related parts.
2) Remove oil level gauge guide attaching bolt
(left hand only) and oil level gauge guide.
3) Remove rocker cover.
40
SERVICE PROCEDURE [W5A2] 2-3a
5. Cylinder Head
4) Remove cylinder head bolts in alphabetical 7) Remove cylinder head gasket.
sequence shown in figure. CAUTION:
CAUTION: Do not scratch the mating surface of cylinder
Leave bolts (a) and (c) engaged by three or four head and cylinder block.
threads to prevent cylinder head from falling.
8) Similarly, remove right side cylinder head.
B2M2628A
5) While tapping cylinder head with a plastic
hammer, separate it from cylinder block.
6) Remove bolts (a) and (b) to remove cylinder
head.
B2M2628A
41
2-3a [W5B0] SERVICE PROCEDURE
5. Cylinder Head
B: DISASSEMBLY
B2M2629A
(1) Valve rocker ASSY (6) Spark plug pipe gasket (11) Valve spring seat
(2) Camshaft cap (7) Retainer key (12) Valve guide
(3) Camshaft (8) Retainer (13) Valve
(4) Oil seal (9) Valve spring
(5) Plug (10) Oil seal
1) Remove valve rocker assembly, camshaft cap 5) Set ST on valve spring. Compress valve spring
and camshaft. and remove the valve spring retainer key. Remove
2) Remove oil seal. each valve and valve spring.
3) Remove plug. ST 499718000 VALVE SPRING REMOVER
4) Place cylinder head on ST. CAUTION:
ST 498267800 CYLINDER HEAD TABLE
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo