Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ENGINE SECTION ENGINE AND TRANSMISSION MOUNTING SYSTEM MSA5TCD99L143

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD99L143 documenatation <<

Text preview - extract from the document

                                        SERVICE PROCEDURE                                        [W1B0] 2-11
                                                                                                     1. Engine


1. Engine                                                    5) Remove under cover

A: GENERAL PRECAUTION
(1) Remove or install engine in an area where
chain hoists, lifting devices, etc. are available for
ready use.
(2) Be sure not to damage coated surfaces of
body panels with tools or stain seats and windows
with coolant or oil. Place a cover over fenders, as
required, for protection.
(3) Prior to starting work, prepare the following:
                                                                                                     B2M0014
Service tools, clean cloth, containers to catch cool-
ant and oil, wire ropes, chain hoist, transmission           6) Drain coolant
jacks, etc.                                                  Set container under the vehicle, and remove drain
(4) Lift-up or lower the vehicle when necessary.             cock from radiator.
Make sure to support the correct positions. 
to 1-3 [G700].>

B: REMOVAL
1) Set the vehicle on lift arms.
2) Open front hood and support with a stay.
3) Release fuel pressure.
   (1) Disconnect fuel tank connector.



                                                                                                    B2M0015A

                                                             7) Remove cooling system.
                                                                (1) Disconnect radiator fan motor connector.




                                          G2M0341

   (2) Start the engine, and run until it stalls.
   (3) After the engine stalls, crank it for five sec-
   onds more.
   (4) Turn ignition switch to "OFF".
4) Disconnect battery cables and remove battery
from vehicle.                                                                                       B2M2035A

                                                                (A)   Main fan motor connector
                                                                (B)   Sub fan motor connector




                                          G6M0095




                                                         7
2-11    [W1B0]                     SERVICE PROCEDURE
1. Engine


  (2) Disconnect radiator outlet hose from ther-         (6) Disconnect radiator inlet hose from radiator.
  mostat cover.




                                                                                               S2M0031
                                      H2M2515
                                                         (7) Remove radiator upper bracket,              and
  (3) Remove reservoir tank.                             remove radiator assembly from vehicle.




                                      S2M0028                                                  B2M2323

  (4) Disconnect ATF cooler hoses from pipes.          8) Collect refrigerant, and remove pressure hoses.
  (AT vehicles)                                        (With A/C)
                                                          (1) Place and connect the attachment hose to
                                                          the refrigerant recycle system.
                                                          (2) Collect refrigerant from A/C system.
                                                          (3) Disconnect A/C flexible hoses from A/C
                                                          compressor.




                                     B2M0016A

  (5) Remove V-belt cover.


                                                                                               B2M2774

                                                       9) Remove air intake system.
                                                          (1) Disconnect connector from mass air flow
                                                          sensor.
                                                          (2) Remove air intake chamber, air intake duct
                                                          with air cleaner upper cover, and remove air
                                                          cleaner element. (Except 2200 cc California
                                      B2M2307             spec. vehicles) 
                                                          (3) Remove air cleaner case and duct. (2200 cc
                                                          California spec. vehicles) 
                                                          and 


                                                   8
                                  SERVICE PROCEDURE   [W1B0] 2-11
                                                          1. Engine


10) Remove chamber stay.

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo