Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ENGINE SECTION ENGINE AND TRANSMISSION MOUNTING SYSTEM MSA5TCD99L144

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD99L144


>> Download MSA5TCD99L144 documenatation <<

Text preview - extract from the document
                                       SERVICE PROCEDURE                                             [W2B0] 2-11
                                                                                                     2. Transmission


2. Transmission                                              6) Disconnect the following connectors.
                                                                (1) Oxygen sensor connector
A: GENERAL PRECAUTION
(1) Remove or install transmission in an area
where chain hoists, lifting devices, etc. are avail-
able for ready use.
(2) Be sure not to damage coated surfaces of
body panels with tools or stain seats and windows
with coolant or oil. Place a cover over fenders, as
required, for protection.
(3) Prior to starting work, prepare the following:
Service tools, clean cloth, containers to catch cool-
                                                                                                          S2M0200A
ant and oil, wire ropes, chain hoist, transmission
jacks, etc.                                                     (1)   Front oxygen sensor connector
(4) Lift-up or lower the vehicle when necessary.                (2)   Rear oxygen sensor connector (California spec.
Make sure to support the correct positions. 
                                                               (2) Transmission        harness      connector        (AT
B: REMOVAL                                                     vehicles)
1) Open front hood fully, and support with stay.
2) Disconnect battery ground terminal.
3) Remove air intake duct and chamber. (Except
2200 cc California spec. vehicles) 
4) Install air intake duct with air cleaner case.
(2200 cc California spec. vehicles)  and 
5) Remove chamber stay.



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo