Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ENGINE SECTION ENGINE LUBRICATION SYSTEM MSA5TCD99L62

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD99L62 documenatation <<

Text preview - extract from the document

2-4    [W1E0]                           SERVICE PROCEDURE
2. Oil Pan and Oil Strainer


E: INSTALLATION                                               2. Oil Pan and Oil Strainer
Installation is in the reverse order of removal.              A: REMOVAL
Observe the following:
1) Apply fluid packing to matching surfaces of oil            1) Disconnect battery ground cable.
pump.
Fluid packing:
     THREE BOND 1215 or equivalent




                                                                                                    G6M0095

                                                              2) Remove front wheels.
                                                              3) Remove air intake duct and air cleaner assem-
                                          H2M2424A            bly. (2200 cc California spec. vehicles)
2) Replace O-ring with a new one.
3) Apply a coat of engine oil to the inside of the oil
seal.




                                                                                                     B2M2771

                                                              4) Remove air intake duct and air intake chamber.
                                                              (Except 2200 cc California spec. vehicles)
                                          S2M0118A

4) Be careful not to scratch oil seal when installing
oil pump on cylinder block.
5) Position the oil pump, aligning the notched area
with the crankshaft, and push the oil pump straight.
CAUTION:
Make sure the oil seal lip is not folded.
6) Install oil pump.
Tightening torque:
                                                                                                     B2M2772
    6.4 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo