Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ENGINE SECTION FUEL INJECTION SYSTEM MSA5TCD99L92

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD99L92 documenatation <<

Text preview - extract from the document

                                      SERVICE PROCEDURE                                         [W7A0] 2-7
                                                                                  7. Front Oxygen (A/F) Sensor


7. Front Oxygen (A/F) Sensor                                4) Disconnect connector from front oxygen sen-
                                                            sor.
A: REMOVAL
1) Disconnect battery ground cable.




                                                                                                   B2M1979A



                                         B2M1723

2) Disconnect air intake duct (B). (2200 cc Califor-
nia spec. vehicles) 




                                                                                                   S2M0127A

                                                            5) Lift-up the vehicle.
                                                            6) Apply SUBARU CRC or its equivalent to
                                                            threaded portion of front oxygen (A/F) sensor, and
                                        B2M2330A            leave it for one minute or more.
3) Remove air intake duct. (Except 2200 cc Cali-            SUBARU CRC (Part No. 004301003)
fornia spec. vehicles)                 7) Remove front oxygen (A/F) sensor.
                                                            CAUTION:
                                                            When removing, do not force front oxygen
                                                            (A/F) sensor in an unnatural way especially
                                                            when exhaust pipe is cold, otherwise it will
                                                            damage exhaust pipe.




                                         S2M0081




                                                                                                    G2M0411




                                                       63
2-7   [W7B0]                            SERVICE PROCEDURE
7. Front Oxygen (A/F) Sensor


B: INSTALLATION                                             6) Install air intake duct (B). (2200 cc California
                                                            spec. vehicles) 
1) Before installing front oxygen (A/F) sensor,
apply anti-seize compound only to threaded por-
tion of front oxygen (A/F) sensor to make the next
removal easier.
Anti-seize compound:
     SS-30 by JET LUBE
CAUTION:
Never apply anti-seize compound to protector
of front oxygen (A/F) sensor.
                                                                                                   B2M2330A

                                                            7) Connect battery ground cable.




                                         G2M0412

2) Install front oxygen (A/F) sensor.
Tightening torque:                                                                                  B2M1723
    21

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo