Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ENGINE SECTION FUEL INJECTION SYSTEM MSA5TCD99L93

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD99L93 documenatation <<

Text preview - extract from the document

                                      SERVICE PROCEDURE                                      [W8A2] 2-7
                                                                                    8. Rear Oxygen Sensor


8. Rear Oxygen Sensor                                    2. EXCEPT 2200 cc CALIFORNIA SPEC.
                                                         VEHICLES
A: REMOVAL
                                                         1) Disconnect battery ground cable.
1. 2200 cc CALIFORNIA SPEC. VEHICLES
1) Disconnect battery ground cable.




                                                                                                B2M1723

                                                         2) Lift-up the vehicle.
                                       B2M1723
                                                         3) Disconnect connector from rear oxygen sensor.
2) Disconnect connector from rear oxygen sensor.




                                                                                                B2M0335

                                       S2M0128
                                                         4) Apply SUBARU CRC or its equivalent to
3) Lift-up the vehicle.                                  threaded portion of rear oxygen sensor, and leave
4) Apply SUBARU CRC or its equivalent to                 it for one minute or more.
threaded portion of rear oxygen sensor, and leave        SUBARU CRC (Part No. 004301003)
it for one minute or more.                               5) Remove rear oxygen sensor.
SUBARU CRC (Part No. 004301003)                          CAUTION:
5) Remove rear oxygen sensor.                            When removing, do not force rear oxygen sen-
CAUTION:                                                 sor in an unnatural way especially when
When removing, do not force rear oxygen sen-             exhaust pipe is cold, otherwise it will damage
sor in an unnatural way especially when                  exhaust pipe.
exhaust pipe is cold, otherwise it will damage
exhaust pipe.




                                                                                                B2M0351



                                       B2M0741




                                                    65
2-7   [W8B1]                          SERVICE PROCEDURE
8. Rear Oxygen Sensor


B: INSTALLATION                                             5) Connect battery ground cable.
1. 2200 cc CALIFORNIA SPEC. VEHICLES
1) Before installing rear oxygen sensor, apply anti-
seize compound only to threaded portion of rear
oxygen sensor to make the next removal easier.
CAUTION:
Never apply anti-seize compound to protector
of rear oxygen sensor.
Anti-seize compound:
     SS-30 by JET LUBE                                                                               B2M1723



                                                            2. EXCEPT 2200 cc CALIFORNIA SPEC.
                                                            VEHICLES
                                                            1) Before installing rear oxygen sensor, apply anti-
                                                            seize compound only to threaded portion of rear
                                                            oxygen sensor to make the next removal easier.
                                                            Anti-seize compound:
                                                                 SS-30 by JET LUBE
                                        B2M0742A            CAUTION:
                                                            Never apply anti-seize compound to protector
2) Install rear oxygen sensor.                              of rear oxygen sensor.
Tightening torque:
    21

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo