Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ENGINE SECTION FUEL INJECTION SYSTEM MSA5TCD99L94

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD99L94


>> Download MSA5TCD99L94 documenatation <<

Text preview - extract from the document
                                   SERVICE PROCEDURE                                      [W9A1] 2-7
                                                                             9. Throttle Position Sensor


3) Connect connector to rear oxygen sensor.         9. Throttle Position Sensor
                                                    A: REMOVAL AND INSTALLATION
                                                    1. 2200 cc CALIFORNIA SPEC. VEHICLES
                                                    1) Disconnect battery ground cable.




                                     B2M0335

4) Lower the vehicle.
5) Connect battery ground cable.

                                                                                             B2M1723

                                                    2) Disconnect connector from throttle position
                                                    sensor.




                                     B2M1723




                                                                                             B2M2297

                                                    3) Remove throttle position sensor holding
                                                    screws, and remove throttle position sensor itself.




                                                                                             B2M2757




                                               67
2-7   [W9A2]                          SERVICE PROCEDURE
9. Throttle Position Sensor


4) Installation is in the reverse order of removal.        3) Remove throttle position sensor holding
CAUTION:                                                   screws, and remove throttle position sensor itself.
When installing throttle position sensor, adjust
the position to match with the specified data.
Tightening torque:
    2.2



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo