Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ENGINE SECTION FUEL INJECTION SYSTEM MSA5TCD99L100

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD99L100 documenatation <<

Text preview - extract from the document

                                      SERVICE PROCEDURE                                    [W15A1] 2-7
                                                                                 15. Engine Control Module


15. Engine Control Module                              5) Remove nuts which hold ECM to bracket.

A: REMOVAL AND INSTALLATION
1. 2200 cc MODEL
1) Disconnect battery ground cable.




                                                                                                B2M2368

                                                       6) Remove clip from bracket.


                                        B2M1723

2) Remove side sill front cover.





                                                                                               B2M2369A

                                                       7) Disconnect ECM connectors.



                                       B2M0672A

3) Detach floor mat of front passenger seat.




                                                                                                B2M2370

                                                       8) Take out ECM.



                                       B2M0673A

4) Remove protect cover.




                                                                                               B2M2371A

                                                       9) Installation is in the reverse order of removal.
                                                       CAUTION:
                                                       When replacing ECM, be careful not to use the
                                        B2M0674
                                                       wrong spec. ECM to avoid any damage to the
                                                       fuel injection system.

                                                  85
2-7   [W15A2]                         SERVICE PROCEDURE
15. Engine Control Module


2. 2500 cc MODEL                                       5) Remove vinyl cover and nuts which hold ECM
                                                       to bracket.
1) Disconnect battery ground cable.




                                                                                          B2M0675A
                                       G6M0095

                                                       6) Remove clip from bracket.
2) Remove front pillar lower trim.





                                                                                          B2M0676A

                                       B2M0672A        7) Remove connector cover.
3) Detach floor mat of front passenger seat.




                                                                                          B2M0677A

                                       B2M0673A        8) Disconnect ECM connector.
4) Remove protect cover.




                                                                                           B2M0678

                                        B2M0674




                                                  86
                                      SERVICE PROCEDURE                                       [W16A0] 2-7
                                                                                              16. Main Relay


9) Take out ECM.                                            16. Main Relay
                                                            A: REMOVAL AND INSTALLATION
                                                            1) Disconnect battery ground cable.




                                        B2M0679A

10) Installation is in the reverse order of removal.

                                                                                                  G6M0095

                                                            2) Remove lower cover and then disconnect con-
                                                            nectors.




                                                                                                  B5M0024A

                                                            3) Lower transmission control module.
                                                            4) Remove the front pillar lower trim.
                                                            
                                                            5) Remove fuse box mounting nuts.
                                                            6) Lower fuse box.
                                                            7) Remove fuse box mounting bracket.
                                                            8) Remove screw which retains bracket of main
                                                            relay and fuel pump relay.




                                                                                                   B2M1191




                                                       87

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo