Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ENGINE SECTION FUEL INJECTION SYSTEM MSA5TCD99L104

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD99L104 documenatation <<

Text preview - extract from the document

2-7   [W19A1]                        SERVICE PROCEDURE
19. Knock Sensor


19. Knock Sensor                                       4) Remove band which holds knock sensor
                                                       harness, and disconnect connector from knock
A: REMOVAL                                             sensor.
1. 2200 cc MODEL
1) Disconnect battery ground cable from battery
ground terminal.




                                                                                           B2M2327A

                                                       5) Remove knock sensor from cylinder block.

                                      B2M1723

2) Remove air cleaner assembly.
(California spec. vehicles only)





                                                                                            B2M2316



                                                       2. 2500 cc MODEL
                                                       1) Disconnect battery ground cable from battery
                                                       ground terminal.
                                      B2M2320

3) Remove air intake chamber.
(Except California spec. vehicles)





                                                                                            B2M1723




                                      B2M2301




                                                  90
                                       SERVICE PROCEDURE                                         [W19B1] 2-7
                                                                                               19. Knock Sensor


2) Remove air intake chamber.                                5) Remove knock sensor from cylinder block.





                                                                                                      B2M1682
                                          B2M1683

3) Remove operating cylinder. (MT vehicles only)             B: INSTALLATION

                                                             1. 2200 cc MODEL
                                                             1) Install knock sensor to cylinder block.
                                                             NOTE:
                                                             The knock sensor cord which is extracted from the
                                                             sensor must be positioned at a 45

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo