Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ENGINE SECTION FUEL SYSTEM MSA5TCD99L113
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD99L113 documenatation <<
Text preview - extract from the document
2-8 [W3A0] SERVICE PROCEDURE
3. Fuel Filler Pipe
3. Fuel Filler Pipe 6) Remove wheel nuts of rear right side.
7) Lift-up the vehicle.
A: REMOVAL 8) Remove rear right side wheel.
1) Release fuel pressure.
2) Open fuel flap lid, and remove fuel filler cap.
B2M1748
9) Remove bolts which install protector cover on
B2M1746 body.
3) Disconnect battery ground cable.
B2M1749
B2M1723 10) While releasing the under side of protector
4) Drain fuel from fuel tank. cover from hook, remove it.
B2M1750A
G2M0345
5) Remove screws which install fuel filler pipe on 11) Disconnect evaporation hoses from pipes.
filler lid open.
B2M1751
B2M1747
16
SERVICE PROCEDURE [W3B0] 2-8
3. Fuel Filler Pipe
12) Remove bolts which hold fuel filler pipe 17) Remove fuel filler pipe to under side of
bracket. vehicle.
B2M1752 B2M1756
13) Lift-up the vehicle more.
14) Remove two evaporation hoses from clip. B: INSTALLATION
1) Set fuel filler pipe from under side of vehicle,
and hold it on fuel filler flap open.
B2M1753
15) Disconnect evaporation hose from joint pipe.
B2M1756
2) Connect fuel filler pipe into fuel filler hose.
B2M1754
16) Loosen clamp, and disconnect fuel filler hose
from fuel filler pipe. B2M1757
B2M1745
17
2-8 [W3B0] SERVICE PROCEDURE
3. Fuel Filler Pipe
3) Lower the vehicle. 9) Install two evaporation hoses to clip.
4) Temporarily tighten screws which install fuel
filler pipe on filler lid open.
B2M1753
B2M1747
10) Connect evaporation hose to joint pipe.
5) Tighten bolt which holds fuel filler pipe on body.
B2M1754
B2M1752
11) Lower the vehicle.
12) While holding the under side of protector
6) Connect evaporation hoses to pipes. cover on bracket, install it.
B2M1751 B2M1750A
7) Lift-up the vehicle. 13) Tighten bolts which install protector cover on
8) Tighten clamp bolt which holds fuel filler hose. body.
B2M1745 B2M1749
18
SERVICE PROCEDURE [W3C0] 2-8
3. Fuel Filler Pipe
14) Tighten screws which install fuel filler pipe on 18) Install fuel sub meter unit, and connect con-
filler lid open. nector and jet pump hose.
B2M1747 G2M0864
15) Install rear right wheel. 19) Connect battery ground terminal.
B2M1748 B2M1723
16) Install fuel filler cap.
C: DISASSEMBLY
1) Move clip, and disconnect evaporation hose
from joint pipe.
B2M1746
17) Install fuel pump, and connect connector and
fuel hoses.
B2M1758
2) Remove bolt which installs joint pipe on fuel
filler pipe.
B2M0047
B2M1759
19
2-8 [W3D0] SERVICE PROCEDURE
3. Fuel Filler Pipe
3) Disconnect evaporation hose from fuel filler 2) Connect evaporation hoses to shut valve.
pipe.
B2M1761
B2M1760
3) Connect evaporation hose to fuel filler pipe.
4) Disconnect evaporation hoses from shut valve.
B2M1760
B2M1761
4) Connect evaporation hose to evaporation pipe.
5) Remove shut valve from fuel filler pipe.
B2M1758
B2M1762
5) Install evaporation pipe to fuel filler pipe.
D: ASSEMBLY
1) Install shut valve on fuel filler pipe.
Tightening torque:
4.4 ◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo