Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ELECTRICAL SECTION BODY ELECTRICAL SYSTEM MSA5TCD99L459

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD99L459 documenatation <<

Text preview - extract from the document

6-2   [W7A1]                          SERVICE          PROCEDURE
7. Turn Signal and Hazard Warning Light


7. Turn Signal and Hazard                                   4) Remove screw, and then remove turn signal
                                                            and hazard unit from bracket.
Warning Light
A: REMOVAL AND INSTALLATION
1. FRONT TURN SIGNAL LIGHT
Remove and install front turn signal light. 
NOTE:
The front turn signal light is united with headlight
assembly.
2. REAR COMBINATION LIGHT                                                                           B6M0343A

Remove and install rear combination light. 
                                                            B: DISASSEMBLY AND ASSEMBLY
3. COMBINATION SWITCH
                                                            1. COMBINATION SWITCH
Remove and install combination switch.                                                 Disassemble and assemble combination switch.
                                                            
4. HAZARD SWITCH
1) Remove center panel from instrument panel.               C: INSPECTION
                                       1. COMBINATION SWITCH (ON-CAR)
2) Disconnect connector of hazard switch from
body harness.                                               1) Remove instrument panel lower cover.
3) Remove hazard switch from center panel.                  2) Remove lower column cover.
                                                            3) Unfasten holddown clip which secures harness,
                                                            and disconnect connectors from body harness.
                                                            4) Move combination switch to respective posi-
                                                            tions and check continuity between terminals.




                                         B6M0063

4) Installation is in the reverse order of removal.
5. TURN SIGNAL AND HAZARD UNIT                                                                       B6M0702
1) Remove instrument panel lower cover.
2) Remove engine hood opener lever bracket.
3) Disconnect connector of turn signal and hazard
unit.




                                                       14
                                 SERVICE PROCEDURE                                        [W8B1] 6-2
                                                                                        8. Back-up Light


                                                     8. Back-up Light
                                                     A: REMOVAL AND INSTALLATION
                                                     1. BACK-UP LIGHT
                                                     Remove and install rear finisher. 
                                                     2. BACK-UP LIGHT SWITCH (MT MODEL)
                                                     Remove and install back-up light switch.  (AWD),  (FWD)
                                                     3. INHIBITOR SWITCH (AT MODEL)
                                                     Remove and install inhibitor switch (R position
                                                     switch). 

                                                     B: INSPECTION
                                                     1. INHIBITOR SWITCH (AT MODEL)
                                                     Inspect inhibitor switch. 

                                    B6M0238



2. HAZARD SWITCH
Move hazard switch to each position and check
continuity between terminals.




                                   B6M0834A




                                                15

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo