Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ELECTRICAL SECTION BODY ELECTRICAL SYSTEM MSA5TCD99L463

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD99L463 documenatation <<

Text preview - extract from the document

6-2   [W10A1]                          SERVICE PROCEDURE
10. Spot Light


10. Spot Light                                               11. Front Wiper and Washer
A: REMOVAL AND INSTALLATION                                  A: ADJUSTMENT
1. SPOT LIGHT AND SWITCH                                     1) Turn the wiper switch to OFF position.
1) Pry spot light lens off using a screwdriver.              2) Adjust blades in original position as shown in
2) Remove screws which secure spot light body.               figure by changing wiper arm installation.




                                          B6M0346                                                    B6M0907A


3) Remove spot light body while disconnecting
connector(s).                                                B: REMOVAL AND INSTALLATION
4) Installation is in the reverse order of removal.
                                                             1. BLADE
B: INSPECTION                                                1) Pull out blade following the arrow direction from
                                                             arm while pushing up locking clip.
1. SPOT LIGHT SWITCH
Move switch and check continuity between termi-
nal of spot light switch connector and steel plate as
shown.




                                                                                                     B6M0107A

                                                             2) Installation is in the reverse order of removal.
                                                             2. WIPER ARM
                                                             1) Open front hood.
                                                             2) Remove cap of wiper arm installation nut.
                                                             3) Remove the nut which secures wiper arm.




                                         B6M0838A




                                                                                                      G6M0118

                                                             4) Remove wiper arm.
                                                             5) Installation is in the reverse order of removal.

                                                        18
                                     SERVICE PROCEDURE                                        [W11B5] 6-2
                                                                                  11. Front Wiper and Washer


NOTE:                                                     8) Remove wiper link from service hole in front
Remove metal sludge from the wiper arm fixture            panel.
before installing it.
Tightening torque:
    20

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo