Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ELECTRICAL SECTION BODY ELECTRICAL SYSTEM MSA5TCD99L475
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD99L475 documenatation <<Text preview - extract from the document6-2 [W22C2] SERVICE PROCEDURE
23. Security System
4) Turn ignition switch OFF with main switch ON 23. Security System
(which is indicated by illumination.).
5) Turn ignition switch ON again to ensure that A: REMOVAL AND INSTALLATION
indicator light remains OFF.
1. SECURITY CONTROL MODULE
2. COMMAND SWITCH 1) Disconnect battery ground cable.
1) Check that command switch is properly set in 2) Remove radio.
"SET/COAST", "RESUME/ACCEL" or "CANCEL" 3) Disconnect connector from security control
mode. module and then remove security control module.
2) Also check that command switch returns to the
original position when released.
3. CONSTANT SPEED TEST
1) Turn main switch ON.
2) Drive vehicle at speed greater than 40 km/h (25
MPH).
3) Press command switch to set in "SET/COAST"
mode.
4) Ensure that vehicle is maintained at the speed
set when command switch was pressed. B6M0942
4. ACCELERATION TEST 4) Installation is in the reverse order of removal.
1) Set vehicle speed at speed greater than 40 NOTE:
km/h (25 MPH).
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo