Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual ELECTRICAL SECTION ENGINE ELECTRICAL SYSTEM MSA5TCD99L445

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD99L445 documenatation <<

Text preview - extract from the document

6-1    [W3F0]                            SERVICE        PROCEDURE
4. Ignition Coil and Ignitor Assembly (2200 cc Model)


F: CLEANING AND REGAPPING                                    4. Ignition Coil and Ignitor
Clean spark plugs in a sand blast type cleaner.              Assembly (2200 cc Model)
Avoid excessive blasting. Clean and remove car-
bon or oxide deposits, but do not wear away por-             A: REMOVAL AND INSTALLATION
celain.                                                      1) Disconnect battery ground cable.
If deposits are too stubborn, discard plugs.
After cleaning spark plugs, recondition firing sur-
face of electrodes with file. Then correct the spark
plug gap using a gap gauge.
Spark plug gap: L
    1.0 -- 1.1 mm (0.039 -- 0.043 in)




                                                                                                      G6M0095

                                                             2) Disconnect spark plug cords from ignition coil
                                                             and ignitor assembly.
                                                             3) Disconnect connector from ignition coil and
                                                             ignitor assembly.
                                          G6M0091




                                                                                                      B6M0932

                                                             4) Remove ignition coil and ignitor assembly.




                                                                                                      B6M0930

                                                             5) Installation is in the reverse order of removal.
                                                             CAUTION:
                                                             Be sure to connect wires to their proper posi-
                                                             tions. Failure to do so will damage unit.




                                                        34
                                     SERVICE PROCEDURE                                             [W5A0] 6-1
                                                                                5. Ignition Coil (2500 cc Model)


B: INSPECTION                                              5. Ignition Coil (2500 cc Model)
Using accurate tester, inspect the following items,        A: REMOVAL AND INSTALLATION
and replace if defective.
1) Primary resistance                                      1) Disconnect battery ground cable.
2) Secondary coil resistance
CAUTION:
If the resistance is extremely low, this indicates
the presence of a short-circuit.
Specified resistance:
[Primary side]
  Between terminal No. 1 and No. 2
     0.73 

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo