Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual MECHANICAL COMPONENTS SECTION AIR CONDITIONING SYSTEM MSA5TCD99L337

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD99L337


>> Download MSA5TCD99L337 documenatation <<

Text preview - extract from the document
                                       SERVICE PROCEDURE                                            [W9B1] 4-7
                                                                                                    9. Lubrication


7. CHECK THE EVAPORATOR                                      9. Lubrication
ASSEMBLY
1) Use one or both of the following methods to
                                                             A: ADJUSTMENT
check the evaporator assembly.                               1. SYSTEM OIL STABILIZATION
2) Remove the drain hose from the case drain                 1) Prior to opening the refrigerant system for
nipple. Hold the probe at the end of the case drain          repairs (except compressor seizure) the system
nipple for at least 10 seconds. Be certain to recon-         must be stabilized for correct oil replenishment.
nect the drain hose when finished.                           2) Follow these procedures:
3) With the ignition key in the "ACC" position, run             (1) Engine speed set to 1,500 rpm
the blower on high speed for 1 minute, then turn                (2) A/C "ON"
the blower off. Place the probe in the center instru-           (3) Air source to recirculate
ment panel vent, an turn the blower on low speed                (4) Blower in 4th or high speed position
for 1 to 2 seconds, then turn the blower off. Leave



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo