Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual MECHANICAL COMPONENTS SECTION BRAKES MSA5TCD99L286

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD99L286 documenatation <<

Text preview - extract from the document

4-4   [W1A1]                              SERVICE PROCEDURE
1. Front Disc Brake


1. Front Disc Brake                                          5) Apply thin coat of PBC GREASE (Part No.
                                                             003607000) to the frictional portion between pad
A: ON-CAR SERVICE                                            and pad clip.
1. PAD
1) Remove lock pin.
2) Raise caliper body.
3) Remove pad.




                                                                                                    B4M1169A

                                                             6) Install pads on support.
                                                             7) Install caliper body on support.
                                                             NOTE:
                                            B4M1167          If it is difficult to push piston during pad
                                                             replacement, loosen air bleeder to facilitate work.
4) Check pad thickness A.
                                                             2. DISC ROTOR
                                                             1) Install disc rotor by tightening the five wheel
                                                             nuts.
                                                             2) Set a dial gauge on the disc rotor. Turn disc
                                                             rotor to check runout.




                                           B4M1168A



Pad thickness            Standard value   17 (0.67)
(including back metal)
                         Wear limit       7.5 (0.295)
mm (in)
                                                                                                     G4M0364
CAUTION:

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo