Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual MECHANICAL COMPONENTS SECTION BRAKES MSA5TCD99L290
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD99L290 documenatation <<Text preview - extract from the document SERVICE PROCEDURE [W5B2] 4-4
5. Master Cylinder
D: ADJUSTMENT 5. Master Cylinder
1. SHOE CLEARANCE A: REMOVAL
1) Remove adjusting hole cover from back plate. 1) Thoroughly drain brake fluid from reservoir
2) Turn adjusting screw using a slot-type screw-
tank.
driver until brake shoe is in close contact with disc
2) Disconnect fluid level indicator harness connec-
rotor.
tor.
3) Remove brake pipes from master cylinder.
4) Remove master cylinder mounting nuts, and
take out master cylinder from brake booster.
CAUTION:
Be extremely careful not to spill brake fluid.
Brake fluid spilt on the vehicle body will harm
the painted surface; wipe it off quickly if spilt.
B: DISASSEMBLY
G4M0416 1. PRECAUTIONS FOR DISASSEMBLING
3) Turn back (downward) adjusting screw 3 or 4 1) Remove mud and dirt from the surface of brake
notches. master cylinder.
4) Install adjusting hole cover to back plate. 2) Prepare tools necessary for disassembly
operation, and arrange them neatly on work bench.
2. LEVER STROKE 3) Clean work bench.
1) Remove console box lid.
2) Forcibly pull parking brake lever 3 to 5 times. 2. DISASSEMBLING PROCEDURE (2200
3) Adjust parking brake lever by turning adjusting cc MODEL WITH ABS)
nut until parking brake lever stroke is set at 7 to 8 1) Remove pin with drift pin which secures reserve
notches with operating force of 196 N (20 kg, 44 tank to master cylinder.
lb).
B4M1446A
B4M0050A
4) Tighten lock nut. 2) Remove cylinder pin with magnetic pick-up tool
5) Install console box lid. while pushing in primary piston.
Lever stroke:
7 to 8 notches when pulled with a force
of 196 N (20 kg, 44 lb)
Tightening torque (Lock nut):
5.9
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo