Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual MECHANICAL COMPONENTS SECTION BRAKES MSA5TCD99L292

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD99L292 documenatation <<

Text preview - extract from the document

                                           SERVICE PROCEDURE                                           [W7B1] 4-4
                                                                                                       7. Brake Hose


4. LACK OF BOOSTING ACTION CHECK                                  7. Brake Hose
Turn off engine, and set the vacuum gauge read-
ing at "0". Then, check the fluid pressure when                   A: REMOVAL
brake pedal is depressed. The pressure must be                    1) Separate brake pipe from brake hose.
greater than the standard value listed below.                     (Always use flare nut wrench and be careful not to
                                                                  deform flare nut.)
                       147N (15 kg,      294N (30kg, 66
  Brake pedal force
                           33 lb)              lb)
                      785 kPa (8
                                        2,158 kPa (22
Models without ABS    kg/cm2, 114
                                        kg/cm2, 313 psi)
                      psi)
                      588 kPa (6        1,667 kPa (17
Models with ABS
                      kg/cm2, 85 psi)   kg/cm2, 242 psi)

5. BOOSTING ACTION CHECK
Set the vacuum gauge reading at 66.7 kPa (500
mmHg, 19.69 inHg) by running engine. Then,
check the fluid pressure when brake pedal is                                                               G4M0426

depressed. The pressure must be greater than the
standard value listed below.                                      2) Pull out clamp to remove brake hose.
                                                                  3) Remove clamp at strut and union bolt.
                       147N (15 kg,      294N (30kg, 66
  Brake pedal force
                           33 lb)              lb)                B: INSTALLATION
                      5,492 kPa (56
                                        8,434 kPa (86             1. FRONT BRAKE HOSE
Models without ABS    kg/cm2, 796
                                        kg/cm2, 1,223 psi)
                      psi)                                        1) Route end of brake hose (on caliper side)
                      5,394 kPa (55     10,003 kPa (102           through hole in brake hose bracket at strut loca-
Models with ABS
                      kg/cm2,782 psi)   kg/cm2, 1,450 psi)        tion.
                                                                  2) Tighten end of brake hose at caliper using a
                                                                  union bolt.
                                                                  Tightening torque (Union bolt):
                                                                      18

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo