Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual MECHANICAL COMPONENTS SECTION BRAKES MSA5TCD99L298

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5TCD99L298


>> Download MSA5TCD99L298 documenatation <<

Text preview - extract from the document
                                       SERVICE PROCEDURE                                        [W13C0] 4-4
                                                                                         13. Proportioning Valve


13. Proportioning Valve                                      CAUTION:
                                                             Do not disassemble or adjust the proportioning
A: INSPECTION                                                valve. (The proportioning valve must be
                                                             replaced as an assembly.)
1) Install the oil pressure gauges to measure the
master cylinder fluid pressure (front wheel brake            C: INSTALLATION
fluid pressure) and rear wheel cylinder fluid pres-          1) Install proportioning valve to bracket.
sure.                                                        2) Connect brake pipes correctly to proportioning
2) Bleed air from the oil pressure gauges.                   valve.
3) Check the master cylinder fluid pressure and              3) Bleed air, then check each joint of brake pipe
rear wheel cylinder fluid pressure.                          for oil leaks.
The standard values are shown in Figure.
                                                             Tightening torque:
                                                               Proportioning valve to brake pipe flare nut:
                                                                 15+3/-2 N



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo