Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual MECHANICAL COMPONENTS SECTION SUSPENSION MSA5TCD99L228

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD99L228


>> Download MSA5TCD99L228 documenatation <<

Text preview - extract from the document
                                  SERVICE PROCEDURE       [W1A0] 4-1
                                                      1. On-car Services


1. On-car Services
A: WHEEL ALIGNMENT
PROCEDURES
Check, adjust and/or measure wheel alignment in
accordance with procedures indicated in figure:




                                                               B4M1088A




                                                  7
4-1   [W1B1]                      SERVICE PROCEDURE
1. On-car Services


B: INSPECTION AND ADJUSTMENT                              jack, service tools, and top up fuel tank.)
                                                          3) Set steering wheel in a wheel-forward position.
1. WHEEL ARCH HEIGHT (FRONT AND                           4) Suspend thread from wheel arch (point "A" in
REAR)                                                     figure below) to determine a point directly above
1) Adjust tire pressure to specifications.                center of spindle.
2) Set vehicle under "curb weight" conditions.            5) Measure distance between measuring point
(Empty luggage compartment, install spare tire,           and center of spindle.




                                                                                                              B4M0566A


                                                          Specified wheel arch height mm (in)
              Vehicles
                                                    Front                                     Rear
              Sedan                    385+12/-24   (15.16+0.47
                                                                /-0.94)                +12
                                                                                   369 /-24 (14.53+0.47/-0.94)
              Wagon                    385+12/-24   (15.16+0.47
                                                                /-0.94)            379+12/-24 (14.92+0.47/-0.94)
          SUS & OUTBACK                420+12/-24   (16.54+0.47
                                                                /-0.94)            419+12/-24 (16.50+0.47/-0.94)




                                                      8
                                        SERVICE PROCEDURE                                        [W1B2] 4-1
                                                                                             1. On-car Services


2. CAMBER (FRONT AND REAR)                                  2) Turn camber adjusting bolt so that camber is
                                                            set at the specification.



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo