Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1999 1999 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION AUTOMATIC TRANSMISSION AND DIFFERENTIAL MSA5TCD99L187

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD99L187


>> Download MSA5TCD99L187 documenatation <<

Text preview - extract from the document
                                   SERVICE PROCEDURE                                         [W5A0] 3-2
                                                                 5. Duty Solenoid C and Transfer Valve Body


5. Duty Solenoid C and                                  4) Raise vehicle and drain ATF.
Transfer Valve Body
A: REMOVAL
1) Remove air intake duct and chamber. (Except
2200 cc California spec. vehicles)




                                                                                               B3M1036A

                                                        5) Remove front exhaust pipe and center exhaust
                                                        pipe.
                                                        Disconnect oxygen sensor connector, and remove
                                                        exhaust pipe.
                                                         and 
                                      S6M0007

2) Remove air intake duct and cleaner case.
(2200 cc California spec. vehicles)
 and 




                                                                                                G3M0305

                                                        6) Remove propeller shaft.
                                                        
                                                        NOTE:
                                      B2M2320           Before removing propeller shaft, scribe matching
3) Remove pitching stopper.                             marks on propeller shaft and rear differential cou-
                                                        pling.




                                      B3M1042
                                                                                                G3M0782




                                                   37
3-2   [W5B0]                           SERVICE     PROCEDURE
5. Duty Solenoid C and Transfer Valve Body


7) Remove rear crossmember.                                (4) Remove extension case.
   (1) Support transmission using a transmission        NOTE:
   jack and raise slightly.                             Use a container to catch oil flowing from extension.
   (2) Remove bolts and nuts as shown in Figure.




                                                                                                 B3M1044
                                      S2M0221
                                                        10) Disconnect duty solenoid C (transfer) connec-
8) Remove vehicle speed sensor 1 (rear).                tor.
                                                        11) Remove duty solenoid C (transfer) and trans-
                                                        fer valve body.




                                      B3M1043

9) Remove extension and gasket.                                                                 B3M1045A
   (1) Remove select cable nut.

                                                        B: INSTALLATION
                                                        1) Install duty solenoid C and transfer valve body.
                                                           (1) Install duty solenoid C and transfer valve
                                                           body.
                                                        Tightening torque:
                                                            T: 8



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo