Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual GENERAL INFORMATION SECTION Periodic Maintenance Services MSA5TCD00L41448

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download MSA5TCD00L41448 documenatation <<

Text preview - extract from the document

G2260BE1 (SGML)

1-5 [G15A1] PERIODIC MAINTENANCE SERVICES
15. Inspect Brake Lines and Check Operation of Parking and Service Brake System

15. Inspect Brake Lines and
Check Operation of Parking and
Service Brake System
MAINTENANCE INTERVAL
[Number of months or km (miles), whichever occurs first]
Months 3 7.5 15 22.5 30 37.5 45 52.5 60 67.5 75 82.5 90 97.5 105 112.5 120
1,000
4.8 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180 192
km
1,000
3 7.5 15 22.5 30 37.5 45 52.5 60 67.5 75 82.5 90 97.5 105 112.5 120
miles
P P P P P P P P

A: INSPECTION
1. BRAKE LINE
1) Check scratches, swelling, corrosion and/or
traces of fluid leakage on brake hoses or pipe
joints.
2) Check the possibility of adjacent parts inter-
fering with brake pipes/hoses during driving,
and loose connections/clamps.
3) Check any trace of fluid leakage, scratches,
etc. on master cylinder, wheel cylinder and
pressure control valve. B1H0409A
NOTE:
When the brake fluid level in the reservoir tank
is lower than the specified limit, the brake fluid B: CHECKING
warning light on the combination meter will 1. SERVICE BRAKE
come on. 1) Check the free play of brake pedal with a
force of less than 10 N (1 kg, 2 lb).
Brake pedal free play:
1 -- 3 mm (0.04 -- 0.12 in)

B1H0408A

G1H0054

28
G2260BE1 (SGML)

PERIODIC MAINTENANCE SERVICES [G15B2] 1-5
15. Inspect Brake Lines and Check Operation of Parking and Service Brake System

2) If the free play is out of specifications above, measure the distance between the brake pedal
adjust the brake pedal as follows: and steering wheel. With the brake pedal re-
(1) Be sure engine is off. (No vacuum is ap- leased, measure the distance between the
plied to brake booster.) pedal and steering wheel again. The difference
(2) There should be play between brake between the two measurements must be less
booster clevis and pin at brake pedal instal- than 95 mm (3.74 in). If the distance is more
ling portion. than specified, there is a possibility air is in the
[Depress brake pedal pad with a force of inside of the hydraulic unit.
less than 10 N (1 kg, 2 lb) to a stroke of 1 to Brake pedal reserve distance: A
3 mm (0.04 to 0.12 in).] more than 95 mm (3.74 in)/
(3) Depress the surface of brake pad by 490 N (50 kg, 110 lb)
hand.
(4) If there is no free play between clevis
pin and clevis, turn brake switch adjusting
nut until the clearance between stopper and
screw of brake switch becomes 0.3 mm
(0.01 in).

G1H0104

4) Check to see if air is in the hydraulic brake
line by the feel of pedal operation. If air appears
to exist in the line, bleed it from the system.
5) Check for even operation of all brakes, us-
ing a brake tester or by driving the vehicle for a
short distance on a straight road.
2. PARKING BRAKE SYSTEM
1) Operation of parking brake is normal if is ap-
plied at sixth notch of ratchet when brake lever
is pulled by force of about 196 N (20 kg, 44 lb).
Total number of the notches is 21.
Parking brake lever stroke:
7 to 8th notch/196 N (20 kg, 44 lb)
2) Parking brake should be adjusted after ad-
justing the shoe clearance of rear brakes.
B1H0029A
3) Remove rear console cover.
4) Adjust parking brake lever by turning ad-
3) Check the pedal stroke. juster (double nut) (A) until parking brake lever
While the engine is idling, depress the brake stroke is set at 7 to 8 notches with operating
pedal with a 490 N (50 kg, 110 lb) load and force of 196 N (20 kg, 44 lb).

29
G2260BE1 (SGML)

1-5 [G15B3] PERIODIC MAINTENANCE SERVICES
15. Inspect Brake Lines and Check Operation of Parking and Service Brake System

5) Check vacuum hose for cracks or other
damage.
NOTE:
When installing the vacuum hose on the engine
and brake booster, do not use soapy water or
lubricating oil on their connections.
6) Check vacuum hose to make sure it is tight
and secure.

B1H0415A

3. BRAKE SERVO SYSTEM
1) With the engine off, depress the brake pedal
several times applying the same pedal force:
Make sure the travel distance should not
change.
2) With the brake pedal depressed, start the
engine: Make sure the pedal should move
slightly toward the floor.
3) With the brake pedal depressed, stop the
engine and keep the pedal depressed for 30
seconds: Make sure the pedal height should
not change.
4) Check valve is built into vacuum hose. Dis-
connect vacuum hose to inspect function of
check valve.
Blow air into vacuum hose from its brake boost-
er side end: Air must flow out of engine side end
of hose. Next blow air into hose from engine
side: Air should not flow out of hose.
Replace both check valve and vacuum hose if
check valve is faulty. Engine side of vacuum
hose is indicated by marking "ENGINE" as
shown.

G1H0106

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo