Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual ENGINE SECTION Engine Lubrication System MSA5TCD00L16132

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD00L16132 documenatation <<

Text preview - extract from the document

                                    SERVICE PROCEDURE                                          [W3A0] 2-4
                                                                                       3. Oil Pressure Switch


3. Oil Pressure Switch                                      (4) Remove bolts which install generator on
                                                            bracket.
A: REMOVAL
1) Remove generator from bracket.
   (1) Disconnect connector and terminal from
   generator.




                                                                                                  S6M0352

                                                          2) Disconnect terminal from oil pressure switch.


                                       B2M3105

  (2) Remove V-belt cover.




                                                                                                  G2M0091

                                                          3) Remove oil pressure switch.


                                       B2M3106

  (3) Loosen lock bolt and slider bolt, and remove
  front side V-belt.




                                                                                                  S2M0119




                                       G2M0286




                                                     13
2-4    [W3B0]                         SERVICE PROCEDURE
3. Oil Pressure Switch


B: INSTALLATION                                          4) Install generator on bracket and temporarily
                                                         tighten installing bolts.
1) Apply fluid packing to oil pressure switch
threads.
Fluid packing:
     THREE BOND 1215 or equivalent




                                                                                                       S6M0352

                                                         5) Install front side V-belt and adjust it.
                                                         
                                        S2M0124A         6) Install V-belt cover.
2) Install oil pressure switch onto engine block.
Tightening torque:
    25

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo