Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual MECHANICAL COMPONENTS SECTION AIR CONDITIONING SYSTEM MSA5TCD00L17585

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD00L17585 documenatation <<

Text preview - extract from the document

                                     SERVICE PROCEDURE                                           [W14B0] 4-7
                                                                                 14. Intake Unit with Evaporator


14. Intake Unit with Evaporator                            B: DISASSEMBLY AND ASSEMBLY
A: REMOVAL AND INSTALLATION                                1) Remove resistor assembly (A) and remove
                                                           thermo control amplifier (B) from intake unit case.
1) Disconnect battery negative terminal.                   2) Remove some screws and clips then separate
2) Discharge refrigerant using refrigerant recovery        intake unit case.
system. 
3) Remove bolt then disconnect discharge pipe
and suction pipe.




                                        S4M0211

4) Remove glove box. 
5) Disconnect the harness connector from intake
unit.
6) Disconnect drain hose.
7) Remove intake unit mounting bolt and nut.


                                                                                                    B4M1811A


                                                           3) Remove the block expansion valve (A) from
                                                           evaporator.




                                        B4M1812

8) Install the intake unit in the reverse order of
removal.
9) Charge refrigerant. 

                                                                                                    B4M1813A

                                                           4) Check to see if the evaporator fins are clogged.
                                                           If they are, clean them with compressed air.
                                                           CAUTION:
                                                           Water must never be used to clean the evapo-
                                                           rator.
                                                           5) Check parts that have been removed for cracks
                                                           or scratches, and repair or replace them with new
                                                           ones, if necessary.
                                                           6) Reassemble the intake unit in the reverse order
                                                           of disassembly.
                                                           NOTE:
                                                           Confirm that the O-ring is inserted in the specified
                                                           position.

                                                      27

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo