Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION Automatic Transmission and Differential MSA5TCD00L18817

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD00L18817


>> Download MSA5TCD00L18817 documenatation <<

Text preview - extract from the document
                                      SERVICE PROCEDURE                                         [W13C0] 3-2
                                                                             13. Reduction Drive Gear Assembly


13. Reduction Drive Gear                                    3) Attach two seal rings.
Assembly                                                    NOTE:
                                                            To make subsequent assembly easier, apply vase-
A: DISASSEMBLY                                              line to the grooves of the shaft and to the exterior
                                                            of the seal ring.
1) Take out the seal rings.
CAUTION:
Be careful not to damage the seal rings.




                                                                                                    B3M1121A




                                        B3M1121A

2) Using ST, remove the ball bearing.
ST 498077600 REMOVER




                                        B3M0962A

3) Using a press, remove the reduction drive gear.




                                        B3M0963A



B: INSPECTION
Make sure that each component is free of harmful
gouges, cuts, or dust.

C: ASSEMBLY
1) Press-fit the reduction drive gear to the shaft.
2) Press-fit the ball bearing to the reduction drive
gear.

                                                       77



◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo