Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION Manual Transmission and Differential MSA5TCD00L18777

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download MSA5TCD00L18777 documenatation <<

Text preview - extract from the document
3-1   [W6A0]                          SERVICE PROCEDURE
6. Front Differential

6. Front Differential                                       4) Pull out pinion shaft, and remove differential
                                                            bevel pinion and gear and washer.
1) Remove right and left snap rings from
differential, and then remove two axle drive shafts.
During reassembly, reinstall each axle drive shaft
in the same place from which it was removed.
2) Loosen twelve bolts and remove hypoid driven


                                                               (A)   Pinion shaft
                                                               (B)   Bevel pinion
                                                               (C)   Bevel gear
                                                               (D)   Washer

                                                            5) Remove roller bearing using ST.
                                                            ST 399527700 PULLER SET


                                                            B: ASSEMBLY
    (A)   Snap ring                                         1) Install bevel gear and bevel pinion together with
    (B)   Axle drive shaft                                  washers, and insert pinion shaft.
    (C)   Hypoid driven gear
3) Drive out straight pin from differential assembly        Face the chamfered side of washer toward gear.
toward hypoid driven gear.
ST 899904100 REMOVER


                                         G3M0667               (A)   Bevel pinion
                                                               (B)   Bevel gear
                                                               (C)   Pinion shaft

                                            SERVICE PROCEDURE                                             [W6B0] 3-1
                                                                                                     6. Front Differential

2) Measure backlash between bevel gear and pin-                    4) Install roller bearing (40 

◦ Jabse Service Manual Search 2021 ◦ Jabse ◦ Other service manual resources online : FixyaeServiceinfo