Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne ac coouni disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download disa documenatation <<

Text preview - extract from the document

AC-28
                        AIR CONDITIONING   -   COOLING UNIT
                                                                                            AC22K-02


                                   DISASSEMBLY
                                   1.  REMOVE A/C AMPLIFIER
                                   2.  REMOVE WIRE HARNESS
                                   3.  Manual A/C:
                                       REMOVE BLOWER RESISTOR
                                   Remove the 2 screws and blower resistor.
                                   4.  Auto A/C:
                                       REMOVE BLOWER LINEAR CONTROLLER
                                   Remove the 2 screws and blower linear controller.

                                   5.    SEPARATE UPPER AND LOWER UNIT CASES
                                   (a) Using a knife, cut off the each packing.
                                   (b) Remove the 3 clips and 3 screws.
                                   (c) Separate the upper and lower unit case.
                                   6.    REMOVE EVAPORATOR FROM LOWER UNIT CASE
                                   HINT:
                                   At the time of reassembly, please refer to the following item.
                                   If evaporator is replaced, add compressor oil to compressor.
                         N17956          Add 40 - 50 cc (1.4 - 1.7 fl.oz.)
                                         Compressor oil: ND-OIL 8 or equivalent
                                   7.    REMOVE THERMISTOR
                                   (a) Disconnect the connector clamp.
                                   (b) Pull out the thermistor from evaporator.




                          I07106



                                   8.    REMOVE EXPANSION VALVE
                                   Using a hexagon wrench (5.0 mm, 0.20 in.), remove the 2 bolts
                                   and separate the expansion valve and evaporator and tubes.
                                         Torque: 5.4 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo