Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne be ante repl

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download repl documenatation <<

Text preview - extract from the document

                                                                                                           BE-155
                                      BODY ELECTRICAL     -   ANTENNA
                                                                                                             BE07H-01



                        Antenna Nut             REPLACEMENT
                                                1.      Auto Antenna Models:
                                                        REMOVE ANTENNA ROD
                                                HINT:
                                                Do this operation with the battery negative (-) cable connected
                                                to the battery terminal.
                                                (a) Turn the ignition switch to "LOCK" position.
                                                (b) Remove the antenna nut.
                                       BE4671



                                                (c)     Press the "AM, FM" buttons on the radio receiver, and si-
                                                        multaneously turn the ignition switch to "ACC" position.
                                                HINT:
                                                S     The rod will be extended fully and be released form the
                                                      motor antenna.
                                                 S    After removing the antenna rod, leave the ignition switch
                                                      "ACC".
                                                NOTICE:
                                       BE5781   To prevent body damage when the antenna rod is released,
                                                hold the rod while it comes out.
                                                2.    Auto Antenna Models:
                                                      INSTALL ANTENNA ROD
                                                (a) Insert the cable of the rod until it reaches the bottom.
                                                HINT:
                                                 S    When inserting the cable, the teeth on the cable must face
                                                      toward the rear of the vehicle.
                                                 S    Insert the antenna by approx. 300 mm (11.8 in.).
                                                (b) Wind the cable to retract the rod by turning the ignition
                                       BE5780         switch to "LOCK" position.
                                                HINT:
                                                 S    If the ignition switch is already in "LOCK" position, do step
                                                      1 (c) first, then turn the ignition switch to "ACC" position.
                                                 S    In case the cable is not wound, twist it, as shown in the
                                                      illustration.
                                                 S    Even if the rod has not retracted fully, install the antenna
                          Twist
                                                      nut and inspect the antenna rod operation. It will finally re-
                                                      tract fully.
                                                (c) Inspect the antenna rod operation by pushing the radio
                                       BE4674         wave band select buttons.




2002 4RUNNER (RM887U)

                                                                   Author :              Date :               1623

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo