Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne be pwcsy adju

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download adju documenatation <<

Text preview - extract from the document

                                                                                                       BE-71
                                    BODY ELECTRICAL   -   POWER WINDOW CONTROL SYSTEM
                                                                                                        BE241-02


ADJUSTMENT
HOW TO RESET POWER WINDOW MOTOR (LIMIT SWITCH)
NOTICE:
If the jam protection function is not functioning properly, perform the following procedures.
HINT:
It is necessary to reset the power window motor (in initial position for the limit switch) when separating the
window regulator from the power window motor or operating the window regulator with the door glass not
installed.
(a) Remove the power window motor.
HINT:
Place matchmarks on the power window motor and window regulator gear.
(b) Connect the power window motor and power window switch to the wire harness of the vehicle.
(c) Turn the ignition switch ON.
(d) Press the power window UP switch until the motor completes 6 to 10 rotations (4 seconds of rotation
       or more).
(e) Assemble the power window motor and regulator.
HINT:
 S     Install the motor when the regulator arm is below the middle point.
 S     Align the matchmarks on the power window motor and window regulator gear when installing the pow-
       er window motor.
(f)    Assemble the power window regulator and door glass.
HINT:
Never rotate the motor downward until the completion of the window glass installation.
(g) Connect the power window switch to the wire harness and turn the ignition switch ON.
(h) Repeat UP and DOWN operation several times manually.
(i)    Check AUTO UP  AUTO DOWN automatic operation is normal.
NOTICE:
 S     The jam protection function does not operate immediately after performing reset.
 S     If the jam protection function is triggered and the window lowers after the window has been fully
       closed by AUTO UP operation (step i), reset the power window motor again.
(j)    Check the power window function.




                                                               Author :             Date :              1539

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo