Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne bo wind inst
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download inst documenatation <<
Text preview - extract from the document
BO-47
BODY - WINDSHIELD
BO26H-01
INSTALLATION
1. CLEAN AND SHAPE CONTACT SURFACE OF BODY
Adhesive (a) Using a knife, cut away any rough areas on the body.
Adhesive HINT:
Leave as much of the adhesive on the body as possible.
(b) Clean the cutting surface of the adhesive with a piece of
shop rag saturated in cleaner.
HINT:
BO4420
Even if all the adhesive has been removed, clean the body.
2. CLEAN REMOVED GLASS
(a) Remove the damaged dam.
(b) Using a scraper, remove the adhesive sticking to the
glass.
(c) Clean the glass with cleaner.
NOTICE:
S Be careful not to damage the glass.
S Do not touch the glass after cleaning it.
BO5231
3. POSITION GLASS
(a) Place the glass in the correct position.
(b) Check that all contacting parts of the glass rim are perfect-
ly even and do not make contact with the spacers.
(c) Place reference marks between the glass and body.
(d) Remove the glass.
BO2820
4. CLEAN CONTACT SURFACE OF GLASS
Using a cleaner, clean the contact surface which is black-col-
ored area around the entire glass rim.
NOTICE:
Do not touch the glass face after cleaning it.
BO4421
5. INSTALL NEW DAM
Install new dam with double-stick tape as shown in the illustra-
6 - 8 mm (0.24 - 0.31 in.) tion.
NOTICE:
Do not touch the glass face after cleaning it.
Z17524
2002 4RUNNER (RM887U)
Author : Date : 1687
BO-48
BODY - WINDSHIELD
6. COAT CONTACT SURFACE OF BODY WITH PRIMER
Primer M "M"
Using a brush, coat Primer M to the exposed part of body on the
vehicle side.
NOTICE:
S Let the primer coating dry for 3 minutes or more.
Primer M S Do not coat Primer M to the adhesive.
S Do not keep any of the opened Primer M for later use.
Adhesive H02865
7. COAT CONTACT SURFACE OF GLASS WITH PRIMER
Primer G
"G"
(a) Using a brush or sponge, coat the edge of the glass and
the contact surface with Primer G.
(b) Before the primer dries, wipe it off with a clean shop rag.
NOTICE:
S Let the primer coating dry for 3 minutes or more.
S Do not keep any of the opened Primer G for later use.
N06556 8. APPLY ADHESIVE
(a) Cut off the tip of the cartridge nozzle.
Part No. 08850-00801 or equivalent
HINT:
After cutting off the tip, use all adhesive within the time de-
scribed in the table below.
Temperature Tackfree time
35◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo