Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne bo wind remo
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download remo documenatation <<
Text preview - extract from the document
BO-45
BODY - WINDSHIELD
BO26G-01
REMOVAL
1. REMOVE ROOM LIGHT LENS AND MAP LIGHT AS-
SEMBLY
(a) Remove the room light lens, screw and map light assem-
bly.
(b) Disconnect the connector.
2. REMOVE INNER REAR VIEW MIRROR
Remove the 3 screws and inner rear view mirror.
3. REMOVE SUN VISORS AND HOLDERS
4. REMOVE ASSIST GRIPS
5. REMOVE FRONT PILLAR GARNISH
(a) Using a screwdriver, remove the front pillar garnish.
HINT:
Tape the screwdriver tip before use.
(b) Employ the same manner described above to the other
side.
6. REMOVE WIPER ARMS
: 4 Clips Remove the 2 caps, 2 nuts and wiper arms.
N17835 7. REMOVE COWL LOUVER
Remove the 6 screws, 4 clips and cowl louver.
8. REMOVE WEATHERSTRIP AND PROTECTOR
2002 4RUNNER (RM887U)
Author : Date : 1685
BO-46
BODY - WINDSHIELD
9. REMOVE WINDSHIELD OUTSIDE UPPER MOULDING
A
(a) Using a knife, cut off the moulding, as shown in the il-
lustration.
A
B B NOTICE:
Do not damage the body with the knife.
(b) Remove the remaining moulding.
A - A
B - B
w/o Rain gutter: w/ Rain gutter:
H09003
10. REMOVE WINDSHIELD GLASS
(a) Push piano wire through between the body and glass
from the interior.
(b) Tie both wire ends to a wooden block or similar object.
HINT:
Apply protective tape to the outer surface to keep the surface
from the being scratched.
NOTICE:
BO5232 When separating the glass, take care not to damage the
paint and interior and exterior ornaments. To prevent
scratching the safety pad when removing the windshield,
place a plastic sheet between the piano wire and safety
pad.
(c) Cut the adhesive by pulling the piano wire around it.
(d) Remove the glass.
NOTICE:
Leave as much of the adhesive on the body as possible
when cutting off the glass.
BO1689
2002 4RUNNER (RM887U)
Author : Date : 1686
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo