Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne bo froseasp reas

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download reas documenatation <<

Text preview - extract from the document

                                                                                                     BO-93
                                              BODY   -   FRONT SEAT (Sports Type)
                                                                                                      BO0D8-02


REASSEMBLY
1.     INSTALL OUTSIDE INNER SHIELD
Install the outside inner shield with the 3 screws.
2.     INSTALL INSIDE INNER SHIELD
Install the inside inner shield with the 2 screws.
3.     INSTALL EQUALIZING WIRE
4.     INSTALL RECLINING CONNECTING PIPE
(a) Adjust the reclining lock positions of the seat adjusters.
(b) Slide the seat adjusters to the most front position.
(c) Place the adjusters on a spacer to adjust the seat rails in parallel and install the connecting pipe.
HINT:
When installing the connecting pipe with raising up the adjusters, the lock positions adjusted in 4-(a) step
slip off, lock error will occur.
(d) Install the 2 silencers to the adjuster pin.
5.     INSTALL SEAT CUSHION COVER
(a) Install the seat cushion cover with new hog rings to set cushion pad.
(b) Install the silencer to the seat cushion frame.
(c) Install the seat cushion cover with pad to the seat cushion frame with new hog rings.
HINT:
When installing the hog rings, take care to prevent wrinkles as little as possible.
6.     INSTALL SEAT CUSHION ASSEMBLY
Install the seat cushion assembly with the 4 bolts to the seat adjuster.
HINT:
Tighten the 4 bolts temporarily, then from the bolts on the rear side tighten completely.
       Torque: 18 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo