Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne bo inspan remo
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download remo documenatation <<
Text preview - extract from the document
BO-69
BODY - INSTRUMENT PANEL
BO26K-01
REMOVAL
1. REMOVE STEERING WHEEL AND PAD
(See page SR-13 )
2. REMOVE FRONT DOOR SCUFF PLATES
Remove the 8 screws and front door scuff plates.
3. REMOVE COWL SIDE TRIMS
4. REMOVE COLUMN UPPER AND LOWER COVERS
AND COMBINATION SWITCH WITH SPIRAL CABLE
(See page SR-13 )
5. REMOVE LOWER FINISH PANEL
(a) Remove the 4 bolts.
(b) Remove the 2 screws and disconnect the hood lock re-
lease lever.
(c) Remove the 2 screws and disconnect the fuel rid release
lever.
(d) Using a screwdriver, remove the lower finish panel.
HINT:
N17844 Tape the screwdriver tip before use.
6. REMOVE NO. 2 HEATER TO REGISTER DUCT
Remove the screw and No. 2 heater to register duct.
7. REMOVE NO. 1 HEATER TO REGISTER DUCT
8. REMOVE STARTER SWITCH BEZEL
Using a screwdriver, pry out the starter switch bezel.
HINT:
Tape the screwdriver tip before use.
9. REMOVE CLUSTER FINISH PANEL
Remove the 4 screws and cluster finish panel.
10. REMOVE COMBINATION METER
(a) Disconnect the connectors.
(b) Remove the 4 screws and combination meter.
N17845
6 Clips 11. REMOVE PARKING BRAKE HOLE COVER
Using a screwdriver, pry out the parking brake hole cover.
HINT:
Tape the screwdriver tip before use.
H08980
2002 4RUNNER (RM887U)
Author : Date : 1709
BO-70
BODY - INSTRUMENT PANEL
4 Clips 12. REMOVE UPPER CONSOLE PANEL
Using a screwdriver, pry out the upper console panel.
HINT:
Tape the screwdriver tip before use.
H08981
7 Clips D D 13. REMOVE CENTER CLUSTER FINISH PANEL
HINT:
C Remove the clips in order "A", "B", "C" and "D" shown in the il-
lustration.
(a) Insert your hand under the center cluster finish panel and
B B remove the "A" clips.
(b) Insert your hand between the instrument panel and cen-
A A ter cluster finish panel and remove the rest of clips, then
H08979 remove the center cluster finish panel.
(c) Disconnect the connectors.
14. REMOVE REAR CONSOLE BOX
(a) Remove the heater control knob.
(b) Remove the 2 bolts, 2 screws and rear console box.
H08983
15. REMOVE UPPER CONSOLE PANEL GARNISH
(a) Remove the clip and upper console panel garnish.
(b) Employ the same manner described above to the other
side.
H08984
16. REMOVE GLOVE COMPARTMENT DOOR
(a) Remove the 2 screws and glove compartment door.
(b) Disconnect the front passenger airbag connector.
NOTICE:
When handling the airbag connector, take care not to dam-
age the airbag wire harness.
H07355
2002 4RUNNER (RM887U)
Author : Date : 1710
BO-71
BODY - INSTRUMENT PANEL
17. REMOVE LOWER NO. 2 FINISH PANEL
(a) Remove the glove box light.
(b) Remove the 3 bolts and lower No. 2 finish panel.
N17847
18. REMOVE GLOVE COMPARTMENT DOOR RE-
INFORCEMENT
Remove the 3 bolts and glove compartment door reinforce-
ment.
19. REMOVE NO. 4 HEATER TO REGISTER DUCT
20. REMOVE RADIO ASSEMBLY
21. REMOVE SIDE BRACKET
Remove the bolt and side bracket.
N17848 22. Manual A/C:
REMOVE HEATER CONTROL ASSEMBLY
(See page AC-93 )
23. Auto A/C:
REMOVE A/C CONTROL ASSEMBLY
(See page AC-84 )
24. REMOVE INSTRUMENT PANEL
(a) Disconnect the airbag connector.
(b) Remove the nut and 2 bolts, as shown in the illustration.
Torque:
Bolt: 19 N◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo