Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne bo qwg remo

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
remo

>> Download remo documenatation <<

Text preview - extract from the document

BO-52
BODY - QUARTER WINDOW GLASS
BO0CH-02

REMOVAL
1. REMOVE NO. 2 ROOM LIGHT
(a) Remove the room light cover, 4 screws and No. 2 room
light.
(b) Disconnect the connector.

2. REMOVE REAR HEADER TRIM
: 6 Clips
Using a screwdriver, remove the rear header trim.
HINT:
Tape the screwdriver tip before use.
3. REMOVE BACK DOOR SCUFF PLATE
Remove the 5 screws and back door scuff plate.
4. REMOVE REAR DOOR SCUFF PLATE
Remove the 2 screws and rear door scuff plate.
H02462

5. REMOVE REAR SEAT SIDE GARNISH
Using a screwdriver, remove the rear seat side garnish.
HINT:
Tape the screwdriver tip before use.

: 2 Clips
: Clip N17828

RH: 6. REMOVE DECK SIDE TRIM
(a) RH:
Using a screwdriver, remove the D/C outlet bezel, then
disconnect the connector.
HINT:
Tape the screwdriver tip before use.
(b) w/ Tonneau cover:
10 Clips
Remove the tonneau cover.
8 Clips
(c) w/ Tonneau cover:
LH: Remove the 2 screws and tonneau cover holder.
(d) w/ Tonneau cover:
Remove the screw and tonneau cover hook.
(e) Remove the screw.
(f) Remove the rear No. 1 seat outer belt floor anchor.
(g) Remove the rear No. 2 seat outer belt.
(h) Insert a screwdriver between the trim and door panel to
9 Clips
remove the trim, then disconnect the connector.
8 Clips
HINT:
H08998
H08999 H09000 Tape the screwdriver tip before use.

2002 4RUNNER (RM887U)

Author : Date : 1692
BO-53
BODY - QUARTER WINDOW GLASS

(i) Remove the deck side trim with the rear No. 1 and No. 2
seat belts passed through its hole.

7. REMOVE QUARTER WINDOW GLASS
(a) w/ Diversity antenna:
Disconnect the connector.
(b) Push piano wire through between body and glass from
the interior.
(c) Tie both wire ends to a wooden block or similar object.
HINT:
Apply protective tape to the outer surface to keep the surface
from being scratched.
Protective Tape
NOTICE:
When separating the glass, take care not to damage the
paint and exterior.
(d) Cut the adhesive by pulling the piano wire around it.
HINT:
Cut the adhesive as shown in the illustration, leaving the adhe-
sive where the pins are.

N21053

(e) Push the piano wire through as shown in the illustration,
cut off the adhered parts to the clip.
(f) Remove the glass.
NOTICE:
Leave as much of the adhesive on the body as possible
when cutting off the glass.

Protective Tape N21052

2002 4RUNNER (RM887U)

Author : Date : 1693

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo