Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne bo readoo disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
disa

>> Download disa documenatation <<

Text preview - extract from the document

BO-14
BODY - REAR DOOR
BO26A-01

DISASSEMBLY
1. w/o Power window:
REMOVE REGULATOR HANDLE
Pull off the snap ring with a cloth and remove the regulator han-
dle and plate.
HINT:
At the time of reassembly, please refer to the following item.
With door window fully closed, install the plate and regulator
BO0020
handle with the snap ring.

2. REMOVE DOOR INSIDE HANDLE
(a) Remove the screw, and slide the handle forward.
(b) Disconnect the handle from the control link and remove
the handle.
(c) Remove the grommet.
3. REMOVE ARMREST
4. w/ Power window:
REMOVE POWER WINDOW SWITCH
Z06410 Using a screwdriver, remove the power window switch by pull-
ing upward, then disconnect the connector.
HINT:
Tape the screwdriver tip before use.

5. REMOVE DOOR TRIM
(a) Remove the 2 clips and 2 screws.
(b) Insert a screwdriver between the retainer and door trim to
pry it loose.
HINT:
Tape the screwdriver tip before use.
(c) Pull the trim upward to remove it.

: 7 Clips N17803

2002 4RUNNER (RM887U)

Author : Date : 1654
BO-15
BODY - REAR DOOR

6. REMOVE SERVICE HOLE COVER
(a) Remove the 2 grommets.
Panel (b) Remove the service hole cover.
HINT:
Cotton
Cover
At the time of reassembly, please refer to the following item.
Tape Bring out the link and connectors through the service hole cov-
er.
7. REMOVE INNER AND OUTER WEATHERSTRIP
BO2455 Pry loose the clips from the edge of the panel, and remove the
inner and outer weatherstrip.
8. REMOVE DIVISION BAR
(a) Remove the screw under the weatherstrip.
(b) Remove the 2 bolts from the door panel.
(c) Pull out the division bar.
9. REMOVE QUARTER WINDOW GLASS WITH WEATH-
ERSTRIP AND GLASS RUN

N17804

10. REMOVE DOOR LOCK AND OUTSIDE HANDLE
(a) w/ Power door lock:
Disconnect the connector.
(b) Remove the clip and pull down the locking knob.
(c) Disconnect the control link from the outside handle.
(d) Remove the 3 torx screws and door lock.
Torque: 5.0 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo