Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne bo sbp remo

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download remo documenatation <<

Text preview - extract from the document

                                                                                       BO-121
                                  BODY   -   SEAT BELT PRETENSIONER


                                 SEAT BELT PRETENSIONER                                  BO21P-02


                                 REMOVAL
                                 NOTICE:
                                  S    If the wiring connector of the seat belt pretensioner is
                                       disconnected with the ignition switch at ON or ACC,
                                       diagnostic trouble codes will be recorded.
                                  S    Never use seat belt pretensioner from another ve-
                                       hicle. When replacing parts, replace them with new
                                       parts.
                                 1.    REMOVE FRONT DOOR SCUFF PLATE
                                 Remove the 4 screws and front door scuff plate.
                                 2.    REMOVE REAR DOOR SCUFF PLATE
                                 Remove the 2 screws and rear door scuff plate.
                                 3.    REMOVE CENTER PILLAR LOWER GARNISH
                                 4.    REMOVE FRONT SEAT OUTER BELT
                                 CAUTION:
                                 Never disassemble the front seat outer belt.
                                 NOTICE:
                                 When removing the front seat outer belt, take care not to
                                 pull the seat belt pretensioner wire harness.
                                 (a) Remove the bolt and front seat outer belt floor anchor.




                                 (b) Using a screwdriver, remove the anchor cover.
                                 HINT:
                                 Tape the screwdriver tip before use.
                                 (c) Remove the bolt and front seat outer belt shoulder an-
                                       chor.




                        H05266



                                 (d)   Disconnect the pretensioner connector as shown in the
                                       illustration.
                                 CAUTION:
                                 When removing the seat belt pretensioner, work must be
                                 started 90 seconds after the ignition switch is turned to the
                                 "LOCK" position and the negative (-) terminal cable is dis-
                                 connected from the battery.
                                 (e) Remove the 2 bolts and front seat outer belt.
                        H04094



2002 4RUNNER (RM887U)

                                                   Author :           Date :             1761

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo