Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne bo seabel insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
Preview not available!
Sorry, no preview image available for this document.
Possible reasons are : this is not a PDF document, it is password protected or the file is partially corrupted.
We are working to fix the issue.
You can still download the full file from the link below and it will be viewable.



>> Download insp documenatation <<

Text preview - extract from the document
                                                                                                    BO-1 19
                                         BODY     -   SEAT BELT
                                                                                                      BO26N-01


                                       INSPECTION
                                       CAUTION:
                                       Replace the seat belt assembly (outer belt, inner belt, bolts
                                       or nuts and sill-bar) if it has been used in a severe impact.
                                       The entire assembly should be replaced even if damage is
                                       not obvious.
                                       1.   Except manual type seat belt:
                                            RUNNING TEST (IN SAFE AREA)
                                       (a) Fasten the front seat belts.

                                       (b)     Drive the car at 10 mph (16 km/h) and make a very hard
                                               stop.
                                               Check that the belt locks and cannot be extended at this
                                               time.
                                       HINT:
                                       Conduct this test in a safe area. If the belt does not lock, remove
                                       the belt mechanism assembly and conduct the following static
                                       check. Also, whenever installing a new belt assembly, verify the
                              BO0632   proper operation before installation.
                                       2.    Driver's seat belt (ELR):
                                             STATIC TEST
                                       (a) Make sure that the belt locks when pulled out quickly.
                                       (b) Remove the locking retractor assembly.
                                       (c) Tilt the retractor slowly.




                                       (d)      Make sure that the belt can be pulled out at a tilt of 15 de-
         15



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo