Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne br fbc insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

BR-18
                                  BRAKE   -   FRONT BRAKE CALIPER
                                                                                              BR082-02


                                 INSPECTION
                                 1.    MEASURE PAD LINING THICKNESS
                                 Using a ruler, measure the pad lining thickness.
                                       Standard thickness: 11.5 mm (0.453 in.)
                                       Minimum thickness: 1.0 mm (0.039 in.)
                                 Replace the pad if the thickness is less than the minimum (the
                                 1.0 mm slit is no longer visible), or if it shows signs of uneven
                                 wear.
                        R13543



                                 2.    MEASURE DISC THICKNESS
                                 Using a micrometer, measure the disc thickness.
                                       Standard thickness: 22.0 mm (0.866 in.)
                                       Minimum thickness: 20.0 mm (0.787 in.)
                                 Replace the disc if the thickness of the disc is at the minimum
                                 or less. Replace the disc or grind it on a lathe if it is scored or
                                 worn unevenly.

                        R13544



                                 3.     MEASURE DISC RUNOUT
                                 Using a dial indicator, measure the disc runout at a position 10
                                 mm (0.39 in.) from the outside edge.
                                        Maximum disc runout: 0.07 mm (0.0028 in.)
                                 If the runout is greater than the maximum, replace the disc or
                                 grind it on a "On-Car" brake lathe.
                                 HINT:
                                 Before measuring the runout, confirm that the front hub bearing
                        R13545   play is within the specification.
                                 4.     IF NECESSARY, ADJUST DISC RUNOUT
                                 (a) Remove the hub nuts and disc. Reinstall the disc 1/6 of
                                        a turn round from its original position on the hub. Install
                                        and torque the hub nuts.
                                        Torque: 103 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo